Broadcaster Precision Large Diaphragm Condenser Microphone
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.
In addition to the Broadcaster's native 20Hz-20kHz response a selectable high-pass filter at 75Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative 'On-Air' indicator on the body that can be wired for external activation by the 'Channel On/Mute' function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
|Acoustic Principle||Pressure Gradient|
|Active Electronics||JFET impedance converter with bipolar output buffer|
|Frequency Range||20Hz - 20KHz|
|Maximium SPL||128dB SPL @ 1KHz, 1% THD into 1KΩ load|
|Maximium Output Level||2.0dBu @ 1KHz, 1% THD into 1KΩ load|
|Sensitivity||-34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) ± 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||14dB-A|
|Dimensions||167.00mmH x 50.00mmW x 65.00mmD|
|Warranty||1 year with free extension to 10 years following registration|