broadcast components logo top

637 INOmini AM SiteStreamer™

Brand: Inovonics
Product Code: 637 INOmini AM SiteStreamer™
Call for Price: 02 8883 4670
- +

The INOmini 637 SiteStreamer™ is a Web-enabled medium-wave AM broadcast receiver for remote signal monitoring. Installed at a broadcast transmitter site, or at any remote location with an Internet connection, the unit streams audio from single or multiple (sequenced) off-air sources, or from a hard-wired program audio feed, back to any computer, tablet or mobile device.

The browser-accessed Web Interface enables remote tuning and source switching, displays audio levels, and allows setup and display of alarm logs. The SiteStreamer™ also dispatches instant email or text message alarm notifications selectively to multiple personnel.

Features:

  • Monitor AM broadcasts from any remote point
  • BandScanner™ shows a spectrum plot of all or part of the AM Broadcast band.
  • ‘Station Rotation’ can monitor multiple station presets by ‘round robin’ sequencing, each with its specific alarm parameters.
  • AES digital AUX input can monitor hardwired audio program feeds (A/B between source and air).
  • Full dynamic browser support of all operating features, including audio streaming, through the dynamic Web Interface
  • Sends instant error messages via email or SMS text; logs signal and audio loss
  • Easy setup and operation; full SNMP support
  • Email/SMS error messaging; SNMP support
  • Headphone jack

 

637 Front 637 Rear larger

 

Specifications:

Tuning Range:  520kHz to 1710Hz in 10kHz steps or 531kHz to 1611kHz in 9kHz steps
Antenna Input:   Isolated F connector accepts a passive outdoor loop antenna (not included, optionally available)
Receiver Sensitivity: ≤100μV for 40dB SNR with 6kHz BW
Audio Response:         Selectable (–6dB): 6kHz, 4kHz, 3kHz, 2kHz
Program Line Input:                       Active-balanced (XLR) stereo left/right or dual-monaural analog AUX inputs with menu-selectable +4dBu or –10dBu nominal reference levels. Local and remote switching between off-air and AUX line-in feeds.
Headphone Jack:    Front-panel (TRS) 3.5mm
Network Connection: LAN (RJ45) jack accepts universal TCP/ IP connection to Local Area Network, and via router to the Internet
Alarms: Low Signal and Audio Loss
Power Requirement:          12VDC at 110mA (2.1mm x 5.5mm coaxial); inline switchmode power supply included. A low-noise linear supply is optionally available as required in certain circumstances.
Mounting Options: An optional rack adapter mounts one, two or three INOmini format units in a standard 19-inch, 1U rack space.
Dims (HxWxD) and Weight: 4.06x13.97x13.97cm; 1.82kg shipping weight

 

 

Specifications:
Tuning Range: Extended FM band: 64MHz to 108MHz in 100kHz steps.
Antenna Input: 75-ohm ‘F’
Receiver Sensitivity: ≤10uV for 50dB monaural SNR.
Audio Frequency Response: ±1dB, 30Hz–15kHz; 50μs/75μs de-emphasis.
Program Line Input: Active-balanced (XLR) left/right analog inputs; internal jumpering for +4dBu or –10dBu “zero-VU” levels; local and remote switching between off-air and line feeds.
Network Connection: LAN (RJ-45) jack accepts universal TCP/ IP connection to Local Area Network, and via router to the Internet.
Power Requirement: 12VDC at 140mA (2.1mm x 5.5mm coaxial); inline switchmode power supply included.
Mounting Options: An optional rack adapter mounts one, two or three INOmini format units in a standard 19-inch, 1U rack space.
Dims (HxWxD) and Weight: 4.06x13.97x13.97cm; 1.82kg shipping weight

Our Vendors

  • Barix
  • Exir-BroadcastingSml
  • Inovonics
  • Sielco
  • amber tech logo
  • solidyne-logo
  • supplier-Henry-ENgineering
  • suppliers-aeq
  • suppliers-beijing
  • suppliers-bwbroadcast
  • suppliers-eaton-GIF
  • suppliers-eddystone
  • suppliers-rode
  • suppliers-rvr
  • suppliers-zcg